Saving Images In The Picture Memory - JVC AV-P960E Bedienungsanleitung

Saving Images in the Picture Memory

Frequently used images can be saved in the picture memory of this unit. Switching between camera images and images from the
picture memory is possible while presentation is in progress. Up to 3 images can be saved.
Button
Indicator
Lamp
USER
DEFAULT
WHITE BALANCE
RED
AUTO
PICTURE MEMORY
CAMERA 1
NEGA POSI BW COLOUR
1.
Retrieving Stored Images
Notes
● This unit is designed to display A4 portrait in full with the camera arm fully extended. For materials with a mixture
of portrait and landscape pages, it may be convenient to save either one of the orientations in the picture memory
before presenting.
● Contents of the picture memory are lost if the power is turned off.
● Existing images stored in the picture memory will be overwrite whenever new images are being stored.
● SD images cannot be stored in this unit.
1.
2.
3.
[BRIGHT]
button
4.
[ZOOM]
button
[FOCUS]
5.
button
SETUP
USER SAVE
BLUE
2 3
6.
TEXT MICROSCOPE
5.
1.
Press the [CAMERA] button
The camera image is outputted.
Adjusting zoom
Adjusting brightness
Adjusting focus
Press [PICTURE MEMORY 1] button for
more than 2 seconds
● The button indicator lamp will light up initially before blinking. It
will go off once the image has been saved.
● The image will become still image.
1.
Repeat Steps
Perform the same procedures for picture memory 2 and 3.
Press the [PICTURE MEMORY] button
The stored images in this unit will be displayed.
Note
● When retrieving the images stored in this unit, do not press
the [PICTURE MEMORY] buttons for more than 2 seconds. The
image will be stored.
● If no image is stored in the picture memory, the screen will
turn black and nothing will be displayed when the [PICTURE
MEMORY] button is pressed.
5.
~
E-17