Revogi SOW323-A02 Kurzanleitung Seite 36

Name change
Click the strip or port name,change as you like.
Modify the port picture
Click the port picture and revise it as you like.
Master-Slave setting
Click" "to enter the Master-Slave Settings interface, and select the "Master" button to set the current
port as the master port. The others can be set as "Slave" or "Neutral": Only one port can be set as the
Master in a Strip.
Timer
Click" "to enter the Timer interface and set the countdown time required, then click "OK", then the
countdown starts. It doesn't work if the certain port power is off.
Power
Check the port power details
Socket Details
Click"
meter to zoom in.
Energy
"enter the interface,check the real-time power of each port ,click port power