Directions For Use; Care And Maintenance; Warranty - Sweeek. Mathilde Imathotb220 Bedienungsanleitung

EN
110KG
MAXIMUM WEIGHT
SUPPORTED :
XX KG

1/ DIRECTIONS FOR USE

For reasons of stability, and to protect the screw threads from crooked tightening, it is essential to
assemble all the components by hand, and to hand-tighten all the screws initially. Once assembly is
complete, you can tighten the screws more firmly. We recommend that you use the tools supplied.
PROTECT THE SURFACE: :
Use placemats, tablecloths, or coasters to avoid stains and scratches caused by crockery, glasses,
and utensils.
Use placemats under hot pots and pans to avoid heat marks.
AVOID SHARP OBJECTS :
Do not cut directly on the table. Use a cutting board to avoid damaging the surface.
AVOID MOISTURE :
Wipe up spills immediately to avoid stains and water damage.
Avoid placing potted plants directly on the table without a waterproof saucer to prevent water leaks.
TEMPERATURE AND LIGHT :
Avoid exposing the table to direct sunlight for long periods, as this could discolour the surface.
Keep the table away from extreme temperature variations to prevent cracking and warping.

2/ CARE AND MAINTENANCE

By following these tips, you can preserve the appearance and functionality of your indoor table for
many years to come.
DAILY CLEANING :
Use a soft, dry cloth to remove dust.
A slightly damp cloth can be used, followed immediately by drying with a dry cloth.
Do not use abrasives or acidic products. Never use solvents.
THOROUGH CLEANING :
For wooden surfaces, use a specific wood cleaner or a mixture of warm water and mild soap.
Avoid harsh chemicals.
For glass surfaces, use a glass cleaner and a microfibre cloth to avoid streaking.
Additional tips :
Use furniture glides under the table legs to avoid scratching the floor and make it easier to move the
table.
Avoid overloading: do not overload the table with heavy objects to avoid distorting or damaging it.
SOLID WOOD FURNITURE :
• To revive the wood's appearance, or if the furniture has suffered damage (knocks, scratches,
etc.), it can be lightly sanded (180-240 grain) and varnished with or without stain.
RATTAN FURNITURE :
• Do not place the rattan furniture near radiators or any other heat source as this can dry out the
material and lead to the formation of cracks.
FURNITURE WITH ELECTRICAL COMPONENTS :
• Only trained personnel should replace or repair height adjusters with energy-storing mechanisms.
6
WARNING :
RISK OF INJURIES
FOR
DOMESTIC USE
ONLY

WARRANTY :

2 YEARS
25 février 2026