Using Functionality; Measuring Activity Data; Measuring Heart Rate; Sleep Monitoring - ADE AM 1700 FITvigo Bedienungsanleitung

Selecting time format
− Select
, then tap and hold
− Tap to select the desired time format and hold it down.
Enabling the do not disturb function
− Select , then tap (off ) and hold
− If the function is active,
− The function is disabled again in the same way.

Using functionality

Measuring activity data

− Display the time and tap repeatedly. Data displayed in succession:
- Number of steps
- Calories consumed
- Distance covered

Measuring heart rate

The heart rate is automatically measured on a regular basis and average
values are transferred to FITvigo app in 10 minutes intervals.
To measure heart rate manually:
− Display the time and tap repeatedly until
seconds, the measured value will be displayed.

Sleep monitoring

The sleep monitoring must not be activated manually. The activity tracker
automatically detects whether you are sleeping in the period from 8 p.m. to 9 a.m.
This does not mean that you cannot sleep longer than 9 hours, but you must go to
sleep within this timeframe for sleep monitoring to begin.
If you go to sleep outside of this time, it will not be registered.
Activity Tracker AM 1700 | 1703 | 1704
.
.
is indicated on the display above the time.
appears in the display. After a few
Using functionality
23