Maintenance, Cleaning And Storing; Removing The Blade - Westfalia Laser 2000 Bedienungsanleitung

Maintenance, Cleaning and Storing

Switch off the unit before cleaning.
The blade should be regularly oiled to guarantee problem-free running over a long
period.
1. Put only a couple of drops of the enclosed vegetable oil onto the blade and
switch on the device for a few seconds to distribute the oil. Then wipe off any
excess oil.
Only use fine machine oil to avoid damaging the device.
2. Do not use abrasives or aggressive chemicals to clean the housing or the
adaptor. Use only a soft moistened cloth.
Store the hair clipper indoors at a dry place that is protected from dust, dirt and
extreme temperatures.
Store the hair clipper out of reach of children.

Removing the Blade

1. First remove the comb guide, as described above.
2. Hold the hair trimmer with one hand and tilt the blade down. Only use little
pressure to remove the engaged blade.
3. Use the included cleaning brush (13) or similar to remove remaining hair and
attach the blade into the notch.
4. You will find a notch in the hair trimmer. First insert the pin into the notch and
press the blade in the hair trimmer until it locks audible. The blade has to be
flush with the housing.
If the device no longer cuts properly, then the blade has become blunt and
must be replaced.
Maintenance and Cleaning
15