Cleaning; Storage; Troubleshooting; Technical Data - Pepcare 15241011 Bedienungsanleitung

05. Cleaning

DANGER!
Before cleaning, pull out the mains plug and allow the device
to cool down.
WARNING!
Do not use any harsh or abrasive cleaning agents.
Clean the device regularly. Be particularly sure to check that the air
inlet and air outlet are free from dust, hairs and fluff.
Wipe the housing, the protective grid above the air intake open­
● ●
ing and the styling brushes with a slightly damp cloth.
Pull the styling brush off the appliance. Hold the hot air styler
● ●
with the air outlet opening pointing down and use a paint brush
to clean the grid on the air inlet opening.
Wipe the attachment axle with a slightly damp cloth.
● ●

06. Storage

DANGER! Do not wrap the cable around the device (cable
break danger!).
You can use the hanging loop in order to store the device in a
● ●
safe and practical manner.

26

07. Troubleshooting

DANGER! Do not attempt to repair the device yourself.
Always remove the mains plug from the socket whenever a
fault occurs.
Fault: Please check the following:
No function Is the power supply secured?
● ●
Has the overheating protection switched off the
● ●
device? Set the on / off switch to 0 (off), pull
out the plug from the mains socket, and allow
the device to cool adequately. Before switch­
ing it back on, ensure that there are no hairs or
foreign bodies blocking the air inlet.
If you are experiencing a fault which is not listed here, please do not
hesitate to contact our Service Centre. Repairs must only be carried out
by a specialised company.

08. Technical Data

Article no.
Mains voltage
Protection class
Output
Ambient temperature
In the course of product improvements we reserve the right to make
technical and visual changes on the appliance or to its accessories.
15241011
220–240 V ~ 50/60 Hz
II
550 W
−10 °C to +40 °C

27