Herunterladen Diese Seite drucken

SUNSET 2400 Bedienungsanleitung Seite 10

Auto-verstärker

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

751-221
Actuators and Connectors in Front:
1. +12 A: Connector for the power cable to the car battery.
2. REM: Connector for the cable to the radio (On-/Off-Switch).
3. GND: Grounding. The cable must be connected to the negative pole of the car battery.
5. FUSE: Interconnected fuse.
6. This cable should be connected to automatic antenna terminal of the radio.
Rear Side:
1. 1/2 INPUT: Terminal low-level input front (Channels 1 and 2).
2. 3/4 INPUT: Terminal low-level input rear (Channels 3 and 4).
3. GAIN: Adjuster input sensitivity for channels 1 and 2.
4. GAIN: Adjuster input sensitivity for channels 3 and 4.
5. BASS: Adjuster bass-booster for channels 1 and 2.
6. BASS: Adjuster bass-booster for channels 3 and 4.
7. LPF: Frequency adjustment low pass filter for channels 1 and 2.
8. LPF: Frequency adjustment low pass filter for channels 3 and 4.
9. X-OVER: Switch frequency separating filter for channels 1 and 2 (HPF/LPF/OFF).
10. X-OVER: Switch frequency separating filter for channels 3 and 4 (HPF/LPF/OFF).
P2007 Jens Broecking © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung

Werbung

loading