Accessories; Water Collecting Tray - FinTec 800.910. 066 Bedienungsanleutung

Accessories

Water collecting tray

The water collecting tray is available as an accessory and can also be retrofitted under a previously-
installed device.
Installation: Insert the two retaining brackets in the floor plate and fasten them on the floor plate with
the included screws (Fig.9). Place the collecting tray on the retaining brackets and slide
it in (Fig.10). For easier insertion, the guide rails under the collecting tray protrude
slightly at the rear.
Fig.9
Fig.10
26
Saunaheater - front
Retaining brackets
Water collecting tray
Floor plate