Main Technical Parameters; Introduction - CombiSteel 7455.0085 Gebrauchsanweisung

MAIN TECHNICAL PARAMETERS

VOLTAGE
MODEL
SUPPLIER
7455.0085
230V/50Hz
7455.0090

INTRODUCTION

1. We advise you to carefully read the instructions contained in this package.
2. If you wish to make the best use of the meat mincer and exploit all its possibilities, you must be thoroughly
familiar with its performance and operating features.
3. The meat mincer may only be used for mincing fresh meat.
4. Maintenance requires just a few simple operations that may be carried out by the operator.
5. To ensure a long life and minimize operating costs, you should carefully follow the rules given in this booklet.
6. The manufacturer has designed the meat mincer to ensure safe operating conditions:
Exclusion or removal of the safety features installed by the manufacturer will seriously undermine the
guaranteed safety conditions.
7. To ensure these conditions you must also fully comply with the instructions regarding the installation and
power supply of the meat mincer.
8. The meat mincer must be installed in a work environment free of corrosive agents.
9. The installation site must not be subject to explosion.
10. The manufacturer company is not liable for any breakdown, accidents or faults caused by a failure to observe
( or to apply ) the instructions contained in this booklet. It is likewise not liable for any modifications, variations
or the installation of accessories not previously authorized.
11. Use only original SPARE PARTS.
12. This instruction booklet is an integral part of the meat mincer and must be kept in a safe place. The features,
information and drawings published in this booklet are the exclusive property of the manufacturer company.
13. No part of this publication may be reproduced or transmitted in any form.
POWER RPM
550W
170
900W
www.combisteel.com
B
A
WIDTH
LENGT (mm)
(mm)
432 261
519 2261
C
HEIGHT
(mm)
484
495
3