SKS-Kinkel Elektronik GmbH HT4500 Bedienung Die Bedienung der Innensprechstelle erfolgt ausschließlich über die Tasten. Mit den Tasten werden Hausrufe angenommen, weitere Funktionen ausgeführt und Einstelllungen vorgenommen. Um das Gespräch anzunehmen, heben Sie den Hörer ab. Um das Gespräch zu beenden, legen Sie den Hörer wieder auf.
SKS-Kinkel Elektronik GmbH HT4500 Rufabschaltung und Rufeinschaltung Um die Innensprechstelle Lautlos zu schalten, schieben Sie den ON / OFF Schalter nach unten in die OFF Position. Eine rote Fläche über dem Schalter zeigt an, dass die Innensprechstelle Lautlos geschaltet ist.
Des Weiteren wird durch das betätigen der Lichttaste ein interner potentialfreier Kontakt auf der Innensprechstelle geschlossen. Hinweis Beachten Sie, dass die Funktion, Licht- und Sondertaste, nur mit der Version der HT4500-4 Innensprechstelle möglich ist. Support-Hotline: +49 (0) 2661 98088 112 - 5 - Version: 1.4...
Wir bieten ausschließlich Support für das Elektro-Handwerk, Architekten und Planungsbüros – Endkunden wenden sich bitte an Ihren Elektro-Handwerksbetrieb Anschrift SKS-Kinkel Elektronik GmbH, Im Industriegebiet 9, 56472 Hof/ Westerwald Tel.: +49 (0) 2661 980 88 0, Fax: +49 (0) 2661 980 88 200 E-Mail: info@sks-kinkel.de, www.sks-kinkel.de...
SKS-Kinkel Elektronik GmbH HT4500 HT4500 Operation The Indoor station is exclusively operated via the keys. To answer the call, lift the handset. To end the conversation, hang up the handset. Please find the functions of the touch keys in the table below.
SKS-Kinkel Elektronik GmbH HT4500 Answer and end call A call from the front door to the indoor station is answered by picking up the receiver. To mute the conversation, hang up the receiver. Pick up the receiver once again to turn the mute mode off.
SKS-Kinkel Elektronik GmbH HT4500 Open door To open the door following a conversation, press the door open key once. The time frame to open the door is 2 minutes long and starts with the first time the bell is rung.
We have checked the content of this document to verify that it corresponds to the hard- and software described herein. There may, however, be deviations and SKS-Kinkel GmbH may not be held liable for a lack of conformity. The information in this document is checked regularly and necessary changes are made in subsequent issues.