SC Pico Dual Bedienungsanleitung Seite 40

38
SC Pico Dual – Using the Device
Adjust the Preheat Function
While the device is powered off, press the "+" and the power button until the mode M1 appears� By
pressing the power button 3 times, "Power" will be displayed on the screen� Press "+" or "-" button to
adjust the wattage of preheat function� Press the power button again to show "Time" on the display�
Press "+" or "-" button to adjust the seconds for preheating or to turn off the preheat function�
Upload Logo
Download the file from our official website (http://www�eleafworld�com/download/)� Connect
the device via USB cable to a computer and double click on EleafUpdate�exe� Then click "Logo"
and open the image you choose to put it in the device� Finally press the fire button twice in quick
succession, when the device is powered on, to enter the logo on/off interface and press "+" or "-"
button one time to turn on/off logo�
Note
1� Please make sure that the image you choose is a monochrome image of 96 x 16 pixels in bmp
format�
2� If you fail to put the custom logo in and the device shuts down, press the "-" button once to
restart the device�