DriverGenius UM02 Bedienungsanleitung Seite 4

• Use the device
1. Connect the USBType-A connector on the UM02 to the USBport on your
computer.
2. Connect the RJII cable to the RJII port on the device and to a phone or
network jack.
3. On your computer, set up your fax client software.
FAQ- https://www.vtop.shop/pages/faq-um02
Copyright and Trademarks
DriverGenlusis a trademark of VTOPINDUSTRY LIMITED,registered in the ELIand other countries.
All other trademarks and trade names are the property of their respective owners.
as a fax modem
�
-2-