Safety Notes - Westfalia 83 65 68 Bedienungsanleitung

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
 Only plug the battery charger to 230 V mains power. Recharge the battery only
with the provided charger.
 Persons with limited physical, sensorial or mental abilities are not allowed to
use the multi tool, unless they are supervised and briefed for their safety by a
qualified person.
 The multi tool may be used with the included sanding paper pads for dry
sanding work only.
 The multi tool may be used with the included straight saw blade for cutting
wood and plastics only.
 Hold the multi tool with both hands and make sure you stand firmly. Secure the
work piece. A work piece can be processed much more safely when it is
secured by clamps or in a vice rather than with your hand.
 Keep your working area clean. Messy mixes of material are especially
dangerous. Aluminium dust is explosive.
 Do not process material which contains asbestos. Asbestos may cause
cancer.
 Protect battery and battery charger from humidity. Do not operate the battery
charger outdoors.
 When not in use and before cleaning and servicing, disconnect the battery
charger from the power supply.
 Take special care of the battery. Avoid dropping it onto any hard surface and
do not subject it to pressure or any other form of mechanical stress. Keep the
battery away from extreme heat and cold.
 Do not open or attempt to repair the battery or the battery charger. If any parts
are damaged have them repaired by a qualified technician or contact our
customer service.
 Only charge, operate and store the battery at an ambient temperature between
10º C and 40º C.
 Important Danger! Never short-circuit the battery or expose it to moisture. Do
not store it together with any metal parts which could short-circuit the contacts.
The battery could overheat, start burning or explode.

Safety Notes

5