Herunterladen Inhalt Inhalt Diese Seite drucken

Kinzo 25C125 Gebrauchsanweisung Seite 27

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
Only use the machine outside, in
well-ventilated surroundings.
Do not use the machine in
precipitation or in humid
surroundings.
Do not use the machine in
surroundings where sparks,
flames or open fire can be
present. Do not smoke near the
machine.
ADDITIONAL SAFETY INSTRUCTIONS FOR
GENERATORS
Place the machine on a solid surface. Do
I
not place the machine on a metal surface.
Do not place the machine in the blazing
I
sun. Do not expose the machine to
temperatures over 40 °C. Do not store the
machine in humid surroundings.
Before use check whether the power input
I
of the equipment to be connected is less
than the maximum output of the generator.
Only connect the equipment when the
I
generator is running at full speed.
Disconnect the equipment before
switching off the generator.
Do not connect any other energy sources
I
to the machine. Do not connect the
machine to mains supply.
Immediately switch off the generator in
I
one of the following situations:
- hitches or unstable running of the motor
- decrease of the electrical output
- overheating of the connected load
- excessive vibrating of the generator
- sparking
- presence of smoke or fire
Make sure that the generator has enough
I
fuel when connected to the load.
Never add fuel when the machine is
I
running. After use let the machine cool
down for at least 15 minutes before
refuelling.
Avoid touching hot parts of the machine.
I
31L801
Do not store fuel near the machine.
I
The sound absorber and the air filter
I
function as flame catchers in case of
after-burning. Therefore see to it that they
are mounted properly and are in good
technical condition.
DESCRIPTION (fig. A)
This generator was designed to generate
electricity to supply mains-supplied
machines or equipment.
1 On/off switch
2 Choke
3 Start cord
4 Fuel cock
5 Lid fuel tank
6 Alternating current output
7 Reset button alternating current output
Adding fuel (fig. A)
Never fill up the fuel when the
machine is running. After use let
the machine cool down for at
least 15 minutes before refuelling.
Always use fuel that fulfils the
following specifications:
unleaded petrol, octane content
at least 85, mixed with oil
(mix ratio oil:petrol 1 : 50).
Never smoke near the machine
or the fuel. Never add fuel in the
vicinity of sparks, flames or
open fire.
Remove the lid (5) from the filler opening.
I
Pour the fuel carefully in the filler
I
opening. Never fill the tank further than to
the top of the fuel filter.
Place the lid back on the filler opening.
I
Starting the motor (fig. A, B & C)
Be sure that NO load is connected.
I
Turn the fuel cock (4) to the position
I
"ON".
27

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Kinzo 25C125

Inhaltsverzeichnis