Troubleshooting - Edision Hdmi Modulator 3In1 Quad+ Bedienungsanleitung

> TROUBLESHOOTING
The device does not boot
• Make sure the power supply is connected
• Check power supply voltage
I cannot export configuration file
• Make sure your USB drive is working
• Make sure that the file system is FAT32
The modulated channel is not produced in the RF OUT
• Make sure that the TV set has a DVB-T, DVB-C or ISDB-T MPEG4 tuner
• Make sure that the selected RF output channel number, is not the same as a received TV channel or
the same as from other modulator output
• In case the HDMI Modulator is connected in line with the aerial antenna or cable network, connect
only the modulator to the RF network and try again
"Signal Loss!" message appears on screen
• Check the HDMI cable and connection, regarding the cable itself and the HDMI IN and HMDMI OUT
• Make sure that the HDMI signal is compatible with the supported formats
The sound is not synchronized with the video
• From the menu "PCR Gap", please adjust the PCR gap accordingly, until you get the perfect Audio/
Video sync
HDMI MODULATOR 3in1 quad+
33