Factory Reset - Edision Hdmi Modulator 3In1 Quad+ Bedienungsanleitung

Frequency (only on DVB-C Mode)
Shows the current RF output
frequency . Use the keys Up &
Down to select the desired RF
output frequency.
Channel (only on DVB-T ή ISDB-T)
Shows the current RF output channel.
Use the keys Up & Down to select the
desired RF output channel.
QAM (only on DVB-C)
Shows the QAM on the DVB-C
modulation mode. Use the Up/
Down keys to change the QAM.
Pre-config ID
Shows the current ID. Use the keys
Up & Down to set the desired ID.
RF Level
Shows the RF output level.
Use the Up/Down keys to adjust
to the desired RF level.
28
LCN Type
Shows the current LCN type.
Use the Up/Down keys to set
the desired LCN type.

Factory reset

Factory defaults. Press the key UP to
restore to factory defaults.
Save to USB
Configuration file extraction (CFG).
Press the key UP to extract the
current configuration to the USB
storage device.
Soft Version
Shows the current Software
version.
TV Standard
Shows the TV STANDARD
modulation signals. Use the Up/
Down keys to change to DVB-T,
DVB-C, or ISDB-T mode.