Back-Up - Abus TV8925 Benutzerhandbuch

SPOT SETUP
At the spot monitor output all cameras are
shown in sequence. In case of an event
(ALARM OR MOTION) the spot monitor will
show the corresponding channel.
- SWITCHING INTERVAL
Here you can set the switching interval of
the spot monitor.
- ALARM POPUP
Here you can set if in case of an ALARM the corresponding channel should be shown.
- MOTION POPUP
Here you can set if in case of a MOTION the corresponding channel should be shown
- EVENT POPUP DURATION
Here you can set how long the event should be shown on the spot monitor.

10.5 Back-Up

USB-BACKUP
- HDD
Here you can see when the recording
started and ended.
- MEDIA
- PARTITION: Shows the size and
available space of the USB media.
- START: Here you can select the start
point of the backup.
- END: On basis of the available space
of the USB media the end time will
automatically be calculated.
- SIZE: Here you can adjust the size of
the backup. The end time will be
automatically recalculated.
- BACKUP
Click here to start the backup.
SWITCHING INTERVAL
ALARM POPUP
MOTION POPUP
EVENT POPUP DURATION
DEFAULT
USB-BACKUP
HDD
START 07/11/2007
END 09/11/2007
MEDIA
PARTITION
START 07/11/2007
END
SIZE
USB STORAGE IS BEING CHECKED
BACKUP
56
SPOT SETUP
MB ->
03 SEC
OFF
OFF
05 SEC
ESC
17:46:14
11:10:41
17:46:14
MB
ZURÜCK