Inse Y10 Bedienungsanleitung Seite 7

5. The charging port protective cap
a.
Open the protective cap to charge
with the attached adptor.
Note:
After each use, wipe and dry the charging pin with a tissue or
cotton swab. Wait a few minutes before charging to dry the
moisture completely.
FAQ
Q1. What color is the indicator light when the machine is operating?
Q1
1. The stable blue indicator light indicates that the machine starts normally.
2. The blue indicator light keeps on during operation, indicating that the machine
is running normally.
3. The red indicator flashes quickly indicates that the battery is insufficient.
Please charge the machine.
Q2. When there is no response after turning on the machine,
and how can I solve the problem?
1. Check whether the battery is completely discharged before use.
Q2
2. If the machine cannot be turned on after connecting the charger or fully charged.
(1) If the battery is not used for a long time, the battery shall be reordered for
replacement due to damage with long storage time.
(2) If the battery cannot be switched on after replacement, please contact customer
service to replace the parts.
b.
After charging，cover the protective
cap.
EN-09
Q3. After press to start the machine, the blue light is on.
After putting it into the water, wait for 30 seconds and the machine
is not started. How to handle it?
Q3
1. Stop the machine, check whether the machine is jammed with other objects.
2. Wipe the surface of the water sensor clean and restart the machine.
3. After turning on the machine several times, contact customer service personnel
to replace the accessories if it has not been started.
Q4. What color is the indicator light on the machine when the adapter
is charging?
Q4
1. Please note that during the charging process, there are two status indications
on the indicator light on the machine. Green flashing indicates that it is in charge
and green light indicates full charge.
2. When fully charged, the machine light will be green.
3. When it is in charge, the machine light flashes.
Q5. How to deal with the slower running speed of the machine and less
suction?
Q5
1. Check whether the water outlet is blocked by sundries in the machine, and check
whether the filter is too dirty.
2. If so, it is recommended to clean it manually first,and then use the machine for
daily maintenance.
3. After using the machine every time, it is recommended to charge the machine.
Q6. If the charging pin is corroded by long time electrolysis, how to
deal with it?
Q6
1. Please note that after each use, wipe the charging pin clean and dry with a
tissue or cotton swab, wait for a few minutes to dry before charging.
2. Please contact customer service personnel to replace accessories in this case.
EN-10