Instructions For Use; Instructions - Starlyf Fast Heater Bedienungsanleitung

been given supervision or instruction
been given supervision or instruction
concerning the use of the appliance in
concerning the use of the appliance in
a safe way and understand the hazards
a safe way and understand the hazards
involved. Children aged from 3 years
involved. Children aged from 3 years
and less than 8 years shall not plug
and less than 8 years shall not plug
in, regulate or clean the appliance, or
in, regulate or clean the appliance, or
perform user maintenance.
perform user maintenance.
CAUTION: Some parts of this product
CAUTION: Some parts of this product
can become very hot and cause burns.
can become very hot and cause burns.
Particular attention must be given where
Particular attention must be given where
children and vulnerable people are
children and vulnerable
present.
present.
This appliance can be used by children
This appliance can be used by children
aged from 8 years and above and by
aged from 8 years and above and by
persons with reduced physical, sensory or
persons with reduced physical, sensory or
mental capabilities or lack of experience
mental capabilities or lack of experience
and knowledge if they have been given
and knowledge if thev have been given
supervision or instruction concerning the
supervision or instrucfionconcerning the
use of the appliance in a safe way and
use of the appliance in a safe way and
understand the hazards involved.
understand the hazards
Children should not be allowed to play
Children should not be allowed to play
with the appliance.
with the appliance.
Cleaning and user maintenance should
Cleaning and user maintenance should
not be performed by children without
not be performed by children without
supervision.
supervision.
- Unplug the heater when not in use.
- Unplugthe heaterwhen not in use.
- Do not use the heater if the plug is
- Do not use the heater if the plug is
damaged, the heater does not work
damaged, the heater does not work
properly, or the device has fallen and
gope rlv, orth e devic e
been damaged in any way. Throw it
een damaged in any way. Throw it
away or take it to an authorized technical
awayor takeit to an authorized technical
service centre for examination and repair.
service centre for examination and repair.
- Do not use the product outdoors. If the
- Do not use the productoutdoors. If the
heater is exposed to inclement weather
heater is exposed to inclement weather
(rain, snow, sun, wind or extreme
rain, snow, sun,
temperatures), it could become a safety
emperatures), it could become a safety
hazard.
hazard.
- Never place the heater where it can fall
- Never place the heaterwhere it can fall
into a bath or any other container with
into a bath or any other container with
water.
water.
- To disconnect the heater, first switch the
- To disconnect the heater, first switch the
ON/OFF button to the OFF position and
ON/OFF button to the OFF position and
then unplug it from the wall socket.
then unplugit from the wall socket.
- Do not allow any objects to enter the
- Do not allow any objects to enter the
air intake and outlet vents or to block the
air intake and outlet vents or to block the
vents, as this could cause electric shock,
vents, as this could cause electric shock,
fire and damage to the heater.
fire and damage to the heater.
people are
involved.
has fallen and
wind or extreme
- To prevent fire, do not block the air
To prevent fire, do not block the air
intake and outlet vents in any way. Do
intake and outlet vents in any wa . Do
not use the heater on soft surfaces (such
not use the heater on soft surfaces
as a bed) where the air vents could be
as a bed) where the air vents coud be
blocked.
blocked.
- The heater has hot parts and interior
- The heater has hot parts and interior
parts that can produce sparks and electric
parts that can produce sparks and electric
arcs. Do not use in places where gasoline,
arcs. Do not use in places where gasoline,
paint or flammable liquids are stored. Do
paint or flammableliquids are stored. Do
not use flammable solvents to clean the
not use flammable
device. Keep the product dry at all times.
device. Keep the productdry at all times.
- The heater should only be used as
The heater should only be used as
described in this manual. Any other use
described in this manual. Any other use
not recommended by the manufacturer
not recommended by the manufacturer
could cause fire, electric shock or
could cause fire,
personal injury.
personalinjury.

2. INSTRUCTIONS FOR USE

2. INSTRUCTIONS

FOR USE
1. Plug the Starlyf® Fast Heater Deluxe into a 220-240V
1. Plug the Starlyf@ FastHeaterDeluxeinto a 220-240V
socket. (1)
socket (1)
Use the plug rotation button to adjust the device to
Use the plug rotation button to adjust the device to
your wall socket. Regardless of how the plug is rotated,
your wall socket. Regardless of how the plug is rotated,
the device should always be operated in the vertical
the device should always be operated in the vertical
position.
position.
ADJUSTING THE DIRECTION OF THE PRONGS ON
ADJUSTING THE DIRECTION
THE PLUG
THE PLUG
- Press and hold down the plug rotation button.
- Press and hold down the plug rotation button.
- Carefully use your other hand to turn the prongs to
- Carefully use your other hand to turn the prongs to
the desired position, as shown in the figure. The prongs
the desired position, as shown in the figure. The prongs
have two positions: vertical and horizontal. However, the
have two positions: vertical and horizontal. However, the
device should always be set up to operate in the vertical
device should always be set up to operate in the vertical
position (never horizontally).
position (never horizontally).
- Release the plug rotation button to lock the prongs in
- Releasethe plug rotation button to lock the prongs in
place. (8)
place. (8)
Note: Press the button again to adjust the position as
Note: Press the button again to adjust the position as
needed.
needed.
2. To turn on the heater, switch the ON/OFF button (on the
2 Totumon theheater, s witch theON/OFF button (onthe
side of the device) to the ON position. (2)
sideof thedevice) t o theONposition. (2)
3. Select the desired temperature. On the device itself or
3 Select t hedesired temperature. Onthedevice itselfor
the remote control, press the "+" button to increase the
the remote control,press the "+" buttonto increasethe
temperature and the "-" button to reduce it (between 15ºC
temperature a ndthe button to reduceit (between 150C
and 32ºC). (3)
and320C)_ ( 3)
4. Select the desired fan speed. On the device itself or the
4. Select t hedesired fanspeed. O nthedeviceItself o r the
remote control, press the fan speed button to choose either
remote control, pressthe fans
high speed (HH) or low (LL). (4)
highspeed(HH)or low(LL).( )
5. When you finish using the device, switch the ON/OFF
5 Whenyoufinishusingthedevice,switch theONIOFF
button to the OFF position and unplug the Starlyf® Fast
buttonto the OFF positionand unplugthe Starlyf@ Fast
Heater Deluxe from the power socket. Store the device in a
Heater Deluxefrom the powersocket Storethe devicein a
cool, dry place until the next time you need it. (5)
cool,dryplaceuntilthenexttimeyouneedit (5)
NOTE: the device will stop producing heat when it reaches
NOTE the devicewill stop producing heat when it reaches
the selected temperature.
the selectedtemperature.
Press the ON/OFF button on the remote control to select
Press the ONIOFF button
standby mode. When this mode is selected, the digital
standby mode. When this mode is selected, the digital
such
solvents to clean
electric shock
OF THE PRONGS ON
edbutton to chooseeither
on the remote control to select
the
or