Start-Up; Control Unit; Power Connection; Master Display - schwa-medico SALIMA Bodywave KLANGLIEGE Gebrauchsanweisung

schwa-medico

Start-Up

Control Unit ①
The control unit is connected to the SALIMA Bodywave® Sound Recliner/
Sound Mat.
»
Insert the plug on the cable for the SALIMA Bodywave® Sound Recliner/Mat into
the 15 pole socket ④ on the reverse side of the control unit and fasten with the
screws. The plug is easily inserted into the socket in the one direction stipulated.

Power Connection

»
Insert the mains power plug into the power socket ③ on the control unit.
»
The mains cable is to be connected with the mains power supply socket (230
V/50Hz.).
»
Switch on the control unit with the ON/OFF switch on the reverse side of the
casing. ②
»
green control lamp ⑥ right, down, on the front side of the control unit, will
illuminate.

Master Display

»
Please wait until the master display with program selection appears.

Program Selection

»
Six programs for relaxation and revitalisation are available for selection.
»
The information program shows function and program sequence.
»
The test program serves to check the function of the body sound generator.
»
Depress the button for the selected program once to enable the program to
start.
»
The system is now operational and the program is loaded. Please wait until the
start screen with the program selection appears.
18
Operating Manual