Herunterladen Diese Seite drucken

Pur Line Insert-Bio Installationsanleitung Seite 4

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
Never mount the product on walls made of
flammable materials (a wooden or plaster
board wall is e. g. not suitable).
WARNING: Ensure that your fireplace is
always positioned away from flammable
materials and other sourcesof ignition.
Thevents of the fireplace may not be covered
or obstructed when using the product.
Only insert the product on even, solid, and
non-flammable
wall
When
installing
assistance of a second person.
Pleaseseek advice at a qualified person prior
to installing the fireplace and if applicable.
Assembly
The insert fireplace is designedfor installation inside a wall or cavity madeof non-combustible
materials.The fireplace cavity should include an insulation layer prior to inserting the fireplace
to limit heat transference.Theabsenceof this insulation layer can causeoverheatingand cause
damageto the materials surroundingthe fireplace.
Do not install directly near wallpaper, laminates or any surfaces that has not been fire-rated
for use near the fireplace. This includes the materials used to finish the decoration around the
insertfireplace.Consultthe productspecifications (wallpaper,laminates, c oatings,glues,etc.)
usedaround the installation to ensurethat heat tolerancesare compatible.
1. Fix the glass to the fireplace with the screws included.
2. Preparethe cavity to insert the bio-fireplace. Consultwith a professional f or advice.
3. Make sure that the fireplace is mounted in the correct position, and fixed securely.
4. Place the burner in the correct position, with the opening facing forward.
Follow the instructions for adding Bioethanol, ignition and extinction, and the safety norms in the attached user
manual. Enjoy the true Purline flame.
• Due to our policy ofcontinuous product improvement, wereservethe right to discontinue orchange product specificationsor designs.
areas.
the
fireplace,
seek the
When insert the fireplace compartment
the fireplace: the burner opening must be
facing forward, that is, towards the opening
on the fireplace.
Attention:
Never place the burner in the
Fireplace when fllled to prevent bioethanol
from being inadvertently spilled.
It is tecommended the use of a high quality ethanol
fuel for fireplaces, as our Purline fuel for fireplaces. The
use of other brands can invalidate the warranty. Always
follow
the
instructions
supplier.
and recommendations
of the
in
fuel
loading