Seite 1
BETRIEBSANLEITUNG OPERATING INSTRUCTIONS MODE D’EMPLOI EX-Rücklaufkabelrolle Typ: KPE mit Klemmzange für zeitweilige Potenzialausgleichsverbindung Rewind cable reel EX Type: KPE with clamp for temporary potential equalization connection Enrouleur de câble à retour EX Type: KPE avec pince de serrage pour connexion temporaire d’égalisation de potentiel KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 1...
Seite 2
Certificate CONTENU FRANÇAIS PAGE Generalités Consignes de sécurité Données techniques Lieu d’installation Installation Opération Maintenance Élimination/environnement Déclaration de conformité de l’UE 10. Dimensions du produit et pour la fixation Certificat EFCO BETRIEBSANLEITUNG KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 2 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 2 13.10.2023 09:40:35 13.10.2023 09:40:35...
Seite 3
EX-Kabelverschraubung ∙ EX cable gland ∙ Presse-étoupe EX Freie Kabellänge ∙ Free cable length ∙ Longueur libre du câble Zuleitung mit Ringöse (optional) ∙ Supply cable with ring eye (optional) ∙ Câble d’alimentation avec oeillet (facultatif) EFCO BETRIEBSANLEITUNG KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 3 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 3 13.10.2023 09:40:35...
Seite 4
Die EX-Rücklaufkabelroll KPE mit Erdungszange dient der zeitweiligen Potenzialaus- gleichsverbindung. Bestimmungsgemässer Betrieb Die Rücklaufkabelrolle KPE entspricht der ATEX Geräteklasse II in der Kategorie 3G und 3D. Damit ist sie für die Verwendung in den EX-Zonen 2 und 22 vorgesehen. Lieferumfang Rücklaufkabelrolle in einem robusten Kunststoffgehäuse mit Potenzialausgleichsleiter...
Seite 5
Regeln der Technik nach EN 60079-14 «Projektie- rung, Auswahl und Errichtung elektrischer Anlagen» und diese Betriebsanleitung massgebend. 5.1. Inbetriebnahme der Zuleitung GEFAHR! • Nie unter EX-Atmosphäre anschliessen – Explo- sionsgefahr. EFCO BETRIEBSANLEITUNG KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 5 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 5 13.10.2023 09:40:35 13.10.2023 09:40:35...
Seite 6
Bild B Bild C Hebel «Z» = 12 mm Bilder D Je nach Kabel-Ø wird die eine oder andere Seite des Klemmteils verwendet. Kabel-Ø 7–9.5 mm Kabel-Ø 9.5 –11 mm EFCO BETRIEBSANLEITUNG KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 6 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 6 13.10.2023 09:40:36 13.10.2023 09:40:36...
Seite 7
• Klemmenzangen-Verbindung nicht durch Ziehen am Kabel trennen. • Bei ausgezogener Potenzialausgleichsleitung muss diese beim selbsttätigen Aufwickeln von Hand zu- rückgeführt werden. Ein unkontrolliertes Zurück- schnellen der Leitung kann zu Verletzungen führen. EFCO BETRIEBSANLEITUNG KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 7 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 7 13.10.2023 09:40:36 13.10.2023 09:40:36...
Seite 8
Die Funktion des Potenzialausgleiches ist mindestens 1× jährlich durch eine Widerstandmessung zu überprü- fen und zu dokumentieren. • Anschlussklemmen regelmässig auf Beschädigung und lose Schrauben prüfen. • Klemmzange regelmässig auf Funktion und loses Anschlusskabel prüfen. EFCO BETRIEBSANLEITUNG KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 8 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 8 13.10.2023 09:40:36 13.10.2023 09:40:36...
Seite 9
Verordnung EG Nr. 1907/2006 (REACH) • Richtlinie 2015/863/EU (RoHS) 9. EU-Konformitätserklärung (Nach RL 2014/34/EU Anhang X) Produktmodell/Produkt EX Rücklaufkabelrolle, Typ: KPE ZNI und KPE ZI Name und Anschrift des Herstellers EFCO Befestigungstechnik AG Grabenstrasse 1 8606 Nänikon, Schweiz EFCO BETRIEBSANLEITUNG KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 9...
Seite 10
EN ISO/IEC 60079-0: 2018 EN ISO/IEC 60079-7: 2016 EN ISO/IEC 60079-31: 2014 Zusatzangaben Interne Fertigungskontrolle nach RL 2014/34/EU Anhang VIII EFCO ist EX-zertifiziertes Unternehmen nach EN ISO/IEC 80079-34:2017 Unterzeichnet für und im Namen von EFCO Befestigungstechnik AG Grabenstrasse 1 8606 Nänikon, Schweiz Nänikon, 30.1.2021...
Seite 11
The EX rewind cable reel KPE with earthing clamp is used for temporary equipotential bonding connections. Intended use The rewind cable reel KPE complies with ATEX device class II in categories 3G and 3D. It is therefore intended for use in EX zones 2 and 22. Content of delivery Rewind cable reel in a robust plastic housing with equipotential bonding conductor and a grounding clamp permanently connected to it.
Seite 12
EN 60079-14 “Planning, selection and installation of electrical installations” and these operating instruc- tions are decisive for installation/operation. 5.1. Starting up the supply line DANGER! Never connect under explosive atmosphere. Danger of explosion EFCO OPERATING INSTRUCTION KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 12 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 12 13.10.2023 09:40:36 13.10.2023 09:40:36...
Seite 13
= 12 mm Pictures D Depending on the cable Ø, one or the other side of the clamping part is used. Cable Ø 7–9.5 mm Cable Ø 9.5 –11 mm EFCO OPERATING INSTRUCTION KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 13 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 13 13.10.2023 09:40:36 13.10.2023 09:40:36...
Seite 14
• If the equipotential bonding conductor is pulled out, it must be returned by hand when it is automatically wound up. Uncontrolled snapping back of the cable causes injuries. EFCO OPERATING INSTRUCTION KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 14 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 14 13.10.2023 09:40:36 13.10.2023 09:40:36...
Seite 15
• Check the connection terminals regularly for dam- age and loose screws. • Regularly check clamping pliers clamps regularly for function and loose connection cable. EFCO OPERATING INSTRUCTION KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 15 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 15 13.10.2023 09:40:36 13.10.2023 09:40:36...
Seite 16
• Directive 2015/863/EU (RoHS) 9. EU Conformity (According to Regulation 2014/34/EU Annex X) Product model/product EX Rewind cable reel, Type: KPE ZNI and KPE ZI Name and address of the manufacturer EFCO Fixing Technology Ltd Grabenstrasse 1 8606 Nänikon, Switzerland EFCO OPERATING INSTRUCTION KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 16...
Seite 17
EN ISO/IEC 60079-7: 2016 EN ISO/IEC 60079-31: 2014 Additional information Internal production control according to RL 2014/34/EU Annex VIII EFCO is EX-certified company according to EN ISO/IEC 80079-34:2017 Signed for and on behalf of EFCO Fixing Technology Ltd Grabenstrasse 1 8606 Nänikon, Switzerland...
Seite 18
1. Généralités Le produit Le rouleau à câble à retour KPE avec pince de mise à terre est utilisé pour les liaisons équipotentielles temporaires. Fonctionnement prévu L’enrouleur de câble de retour KPE est conforme à la classe II des appareils ATEX dans les catégories 3G et 3D.
Seite 19
électriques » et le présent mode d’emploi sont déterminants. 5.1. Mise en service de la ligne d’approvisionnement DANGER ! Ne vous connectez jamais dans une atmosphère ATEX. Danger d’explosion. EFCO MODE D’EMPLOI KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 19 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 19 13.10.2023 09:40:37 13.10.2023 09:40:37...
Seite 20
= 12 mm Images D Selon le Ø du câble, on utilise l’un ou l’autre côté de la pièce de serrage. Câble Ø 7–9.5 mm Câble Ø 9.5 –11 mm EFCO MODE D’EMPLOI KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 20 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 20 13.10.2023 09:40:37 13.10.2023 09:40:37...
Seite 21
• Si le conducteur de liaison équipotentielle est retiré, il doit être ramené à la main lorsqu’il est enroulé automatiquement. Un enroulement incontrôlé du câble peut entraîner des blessures. EFCO MODE D’EMPLOI KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 21 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 21 13.10.2023 09:40:37 13.10.2023 09:40:37...
Seite 22
• Vérifiez régulièrement que les cosses de connexion ne sont pas endommagées et que les vis ne sont pas desserrées. • Vérifiez régulièrement le bon fonctionnement des pinces de serrage et le câble de connexion desserré. EFCO MODE D’EMPLOI KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 22 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 22 13.10.2023 09:40:37 13.10.2023 09:40:37...
Seite 23
(Selon l’annexe X de la 9. Déclaration de conformité de l’UE directive 2014/34/UE) Modèle de produit/produit Enrouleur de câble à retour, Type : KPE ZNI et KPE ZI Le nom et l’adresse du fabricant EFCO Technique de Fixation SA Grabenstrasse 1 8606 Nänikon, Suisse...
Seite 24
EN ISO/IEC 60079-31: 2014 Informations complémentaires Contrôle interne de la production selon le RL 2014/34/EU Annexe VIII EFCO est une entreprise certifiée EX selon la norme EN ISO/IEC 80079-34:2017 Signé pour et au nom de EFCO Technique de Fixation SA Grabenstrasse 1 8606 Nänikon, Suisse...
Seite 25
10. Abmessungen und Anbaumasse Product dimensions and installation dimensions Dimensions du produit et dimensions pour la fixation 148 mm 62.5 mm 85.5 mm 112 mm 71 mm 80 mm 7 mm 110.5 mm EFCO BETRIEBSANLEITUNG KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 25 KPE_Betriebsanleitung_DE-EN-FR_ZNV0228_9-2023.indd 25 13.10.2023 09:40:37 13.10.2023 09:40:37...