Operation Of The Steering Wheel Remote Control - Audiotechnik Dietz 61034 Bedienungsanleitung

14
Assignment of the wires with loose ends:
Pink: speed impulse
Brown: signal for reverse gear
White: tel. mute
Those wires have to be plugged into the power ISO jack from the Cable kit in dependence of the
assignment from power ISO connector of the retrofitted unit. For assignment please refer to the
installation manual of the retrofitted unit.
E
N
G

Operation of the steering wheel remote control

L
I
S
H
ATTENTION: The steering wheel remote control will only work when ignition is on. If the
Interface is installed with BECKER head units, you can only connect the current CD-changer
which is announced to fit with your head unit! Only the original radio is able to reproduce RDS
data in the multifunction display (dashboard). This is not supplied by manufacturers of
aftermarket head units!
Button
Radio: next preset
CD: next track
CD-Wechsler: next track
Radio: previous preset
CD: previous track
CD-Wechsler: previous track
®
Copyright © by Audiotechnik Dietz
Rev 4, Stand: 04/2008
Function
Volume +
Volume -
®
Vertriebs-GmbH ● Germany