Herunterladen Diese Seite drucken

Snom Expansion Module V2.0 Bedienungsanleitung Seite 3

Vorschau ausblenden Andere Handbücher für Expansion Module V2.0:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

[ s n o m E x p a n s i o n m o d u l e V 2 . 0 ]
Programming the Expansion Module
Configure the function keys on the Expansion Module using the built-in web interface
of the phone. The default operation is Line. The LEDs associated with each key will
reflect the status of that line, e.g. ringing, on-hold, connected call, etc.
Changing the label
The label panels for the function keys are included on a separate sheet enclosed
with the operating instructions. Cut out the label you wish to use. To change the
label panel, press the flexible cover together between your index finger and thumb
and lift it out. The label panel can now be changed.
© 2007 snom technology Aktiengesellschaft.
All Rights reserved. This document is supplied by snom technology AG. No part of this document may be
reproduced, republished or retransmitted in any form or by any means whatsoever, whether electronically or
mechanically, including, but not limited to, by way of photocopying, recording, information recording or through
retrieval systems, without the express written permission of snom technology AG.
snom technology AG reserves the right to revise this document and make changes at any time and without the
obligation to notify any person and/or entity of such revisions and/or changes.
ww.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 4
keypad, attach it to the second one in the same manner.
Now turn the telephone and Expansion Module over.
Plug in the power connector of your phone. Wait for the snom phone
to boot completely. Just before boot-up is completed, all LEDs on the
Expansion Module(s) will flash once. The Expansion Module(s) is/are now
ready for operation.
Currently, three additional Expansion Modules with 42 function keys
each can be connected to the snom phone. Their power is supplied by
the phone; an external power adapter is not necessary.
When you press the question mark key "?" on the phone's keypad the
display will show the Expansion Module's version (EK: 1.3, for example)
following the software version of the phone itself.
• 3

Werbung

loading

Verwandte Produkte für Snom Expansion Module V2.0

Diese Anleitung auch für:

Erweiterungsmodul v2.0