Sound Town X6 Bedienungsanleitung Seite 4

BLUETOOTH
Single speaker Bluetooth
1. Turn on the power of the speaker, it will first enter Bluetooth mode and you will
hear a voice prompt. When in other mode. Pressthe M button to switch to blue-
tooth mode till you hear a voice prompt.
2. In the setting of your Bluetooth enabled devices, set it to 'discover' available
devices. From the Bluetooth device list, select the 'X6 device. Then you will hear
a voice prompt and the speaker is now paired with your bluetooth devices.
Two speakers Bluetooth Pairing (TWS linking):
1. Switch off the Bluetooth function on your Bluetooth enable devices.
2. Turn on the power of both speakers at the same time.
3. Triple press the function button on any of the 2 speakers till you hear a voice
prompt, the TWS series connection is successful.
4. In the setting of your Bluetooth enabled devces, set it to 'discover' available devices.
From the Bluetooth device list, (only one device is displayed,) select the 'X6' device.
5. Both speakers are now paired with your Bluetooth enabled device. Audio signal will
automatically be divided into left and right channels and you can en •oy the TWS' sound.
* NOTE:
* The TWS pairing operation only need for first time TWS linking or when TWS linking
has been disconnected, the speakers have their memory for TWS linking with the save
pairing devices.
* When the 2 speakers are in 'TWS' linking, you can control the volume, play/ pause,
previous/ next song for both speakers by just control any one of the speaker.
SPECIFICATIONS
Product type: Bluetooth speaker
Bluetooth version: 5.0 support TWS
Interface: USB/TF card/ 3.5mm AUX
Support format: MP3/ WAV
Speaker power: 5W RMS, IOW peak
Playtime: IOru12 hours music play
Input power: DC 5V/ IA
Charging time:
Bluetooth connection range: up to 30 feet
(open area without
Speaker size: 52mm
Battery capacity: 3.7V/ 1200mAh
Microphone: Bluetooth call
Distortion: <1%
PAIRING
Pairing:
hours
obstacles)
EN