Herunterladen Diese Seite drucken

InfinityLab ILING5000W InstantGO Anweisungen Seite 3

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
ENGLISH
IMPORTANT SAFETY
INSTRUCTIONS
For all products:
WARNING: WHEN USING THIS APPARATUS, BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. This product should be operated only in open-air conditions. It
should not be operated in an enclosed, unventilated space such
as a carrying bag, pocket, purse or bedding. Failure to follow
these instructions may damage the product by overheating.
7. Do not store device in high-temperature environment,
including heat caused by intense sunlight or other
forms of heat.
8. Do not expose device in fire or other excessively hot
environments or extremely low air pressure. Exposure to fire
or temperature above 45°C (113°F) or extremely low pressure
may cause explosion.
020-003_INFINITY LAB_Powerbank_Safety Sheet_(100x50mm)_V1.1.indb 3
020-003_INFINITY LAB_Powerbank_Safety Sheet_(100x50mm)_V1.1.indb 3
9. Do not expose this apparatus to rain or snow, and ensure
that no objects filled with liquids, such as vases, are placed
on the apparatus.
10. To reduce the risk of injury, close supervision is necessary when
the product is used near children.
11. Do not use the apparatus in excess of its output rating.
Overload outputs above rating may result in a risk of fire or
injury to persons.
12. Do not disassemble this product or attempt to re-purpose or
modify it in any manner. Take it to a qualified service person
when service or repair is required. Incorrect reassembly may
result in a risk of fire or injury to persons.
13. Do not use the power bank that is damaged or modified. Be
cautious of drops, bumps, abrasions, or other impacts to this
product. If there is any damage to the product such as dents,
punctures, tears, deformities, or corrosion due to any cause,
discontinue use. Contact manufacturer.
14. If you find that your device is excessively hot, is emitting odor,
is deformed, abraded, cut, or is experiencing or demonstrating
an abnormal phenomenon, immediately stop all product use
and contact manufacturer.
15. Have servicing performed by a qualified repair person using
only identical replacement parts. This will ensure that the
safety of the product is maintained.
16. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles and the point
where they exit from the apparatus.
17. Use only attachments/accessories specified by the manufacturer.
18. Unplug this apparatus during lightning storms or when unused
for long periods of time.
19. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as when the enclosure is damaged, liquid has been spilled
or objects have fallen into the apparatus, or the apparatus has
been exposed to rain or moisture, does not operate normally
or has been dropped.
20. To disconnect this apparatus from the AC mains completely,
disconnect the plug from the AC receptacle.
21. The mains plug of the apparatus shall remain readily operable.
22. This apparatus is intended to be used only with the power
supply and/or charging cable provided by the manufacturer.
• Do not use this apparatus near water.
• Do not expose this apparatus to dripping or splashing, and ensure that
no objects filled with liquids, such as vases, are placed on the apparatus.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
3/15/2021 5:24:02 PM
3/15/2021 5:24:02 PM
loading