Herunterladen Diese Seite drucken

jcm-tech BOX-DCS Handbuch Seite 2

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Important safety instructions--------------------------------------------------EN
This manual contains important instructions and warnings for personal safety. Carefully read all parts of this
manual. If in doubt, suspend installation immediately and contact the manufacturer Technical Assistance.
Keep this manual in a safe place to enable future product maintenance and disposal procedures.
Important safety instructions for installation
Disconnect the power supply whenever you proceed to the installation, main-
tenance or repair of the equipment.
•Install any permanent control next to the door away from any moving part and at a minimum height of 1.5m.
•For permanently connected equipment, an easily accessible power disconnection device must be incorporated into the wir-
ing. It is recommended that this be of the emergency switch type.
•This equipment can only be handled by a specialist fitter, by maintenance staff or by a suitably trained operator.
•Use protective goggles when handling the equipment.
•Fuses must only be handled when the appliance is disconnected from the mains.
•The instructions for using this equipment must remain in the possession of the user.
•Never apply modifications to any part of the device. Operations other than those specified may only cause malfunctions. The
manufacturer declines all liability for damage caused by makeshift modifications to the product.
•Never place the device near to sources of heat and never expose to naked flames. These actions may damage the product
and cause malfunctions.
•Handle the product with care, being sure not to crush, knock or drop it in order to avoid damage.
Important safety instructions for use
•This product is not intended for use by people (including children) with reduced physical, sensory or mental capabilities or
who lack experience and knowledge, unless they have been given supervision or instruction concerning the use of the product
by a person responsible for their safety.
PRODUCT DISPOSAL This product may not be disposed of together with domestic waste. Sort the materials for
disposal, according to the methods envisaged by current legislation in your area, or return the product to the retailer
when purchasing an equivalent product.
Use of the equipment / Use of the system
Designed for automation of garage doors, in accordance with the general description. Not guaranteed for other uses.
The manufacturer reserves the right to alter equipment specifications without prior notification. No liability can be accepted
for errors and misprints.
jcmtechnologies
2
loading

Verwandte Produkte für jcm-tech BOX-DCS