Flysurfer Strider Handbuch Seite 6

Pump air into the Stand-Up-Paddle Board un-
til the pressure gauge on the pump reaches
a maximum of 10 psi.
Remove the end of the pump hose from the
valve with a counterclockwise turn.
Fasten the valve cap on the valve with a
90 degree turn clockwise.
With one hand, push in the the spring pin
and stick the two paddle parts together.
Push the half-ring back, adjust for the cor-
rect paddle length with the help of the scale
and then return the half-ring into position.
3. Action
Carry the board sideways under your arm
with the help of the carrying strap. Now go
onto the water and have fun!
ENGLISH