Connect To The Internet - Blade Shadow Ghost Benutzerhandbuch

Connect your Shadow Ghost directly to your internet Box / Router, with an Ethernet cable.
If you do not use an Ethernet connection, you will have the option later during the
It is not recommended to use a BPL (broadband over power line) connection for your Shadow ghost.
Turn on
Press for 2 seconds until you see the red
LED appear
Turn off
Press for 6 seconds until the red LED turns off
Back to Shadow options screen
Quick press
Once you've plugged everything in, you can turn on your Shadow Ghost by pressing the Shadow Ghost's
power button for 2 seconds, until the red LED below lights up to indicate power up.
Shadow will initialise, it may take a minute or two, please do not turn it off or restart it.
ETHERNET WIFI 5 GHZ
2

Connect to the internet

setup to connect to a Wi-Fi network.
3
Turn on your Shadow Ghost
7