NILS FUN RB002 Benutzerhandbuch Seite 5

Maintenance and Care
Check the ride on bike before use for loose components and re-tighten where necessary. Make sure all
clamps and locking mechanisms are securely fastened.
Replace worn or broken parts immediately.
Check that wheels are securely attached and that wheels are rolling freely.
To ride the ride on bike
Standing on the ground, place one foot on either side of the ride on bike.
Place one hand on each handle and push forward with feet.
Part list:
Main frame
Instruction assembly
Step 1:
Insert the front wheels into the main frame tube
Step 2:
Remove the screw and nut from the handlebar stem Place
the handlebar stem into the main frame tube onto the
front wheel stem.
Step 3:
Align the holes in the handle bar stem with the holes in the front
wheel stem.
Fasten with the nut and bolt and tighten securely.
Push the clamp cover down to until it clicks into place and locks,
covering the nut and bolt.
PL-Producent/ EN-Producer/DE-Hersteller
ABISAL Sp. z o.o., ul. Pyskowicka 14, 41-807 Zabrze, Poland
www.abisal.pl
CZ- Distributor
ABISTORE SPORT S.R.O U Cihelny 230/3 74801 Hlučín, Česká Republika
www.abistore.cz
EU DECLARATION OF CONFORMITY
can be found on the manufacturer's website: www.abisal.pl/do-pobrania/
Front wheels Handlebar
5
Tool fo assembly