Orbit baby G2 Gebrauchsanweisung Seite 17

Cleaning
Avoid excessive exposure to sun or heat, which may cause fading or warping. Keep the SmartHub,
twist grip and handlebar mechanisms free of abrasive grime and moisture. If wet, use a soft cloth to
dry. Regularly check all rivets, screws and safety devices for tightness and security. Inspect restraint
harness and wheels and replace if necessary. All hard goods (plastic and metal) may be wiped clean
with a damp cloth. Never use bleach or detergents. Do not submerge or use running water on any
metal or plastic parts of the stroller.
⚠
WarNING
◦
To prevent entrapment and falls, upholstery must be properly attached.

removing your stroller seat upholstery and sunshade (images above)
⃞ Upholstery Ⓛ can be removed by unzipping and releasing the tabs under the stroller seat.
⃞ Disconnect both shoulder straps from both waist belts, and remove the shoulder pads Ⓜ.
Feed the shoulder straps, crotch strap and waist straps through the upholstery while pulling the
upholstery free of the seat shell. Replace the upholstery after washing and drying by reversing the
steps above.
Manual Text Booklet – Orbit Baby Stroller G2 – ENGLISH – 17
⚠