Anmytek GS005 Bedienungsanleitung
Quicklinks
Let's build the SKU
No heartburn,
when we handle the return
Give us a call 1-909-455-7520 or shoot us a message
at service@anmytek.com we will issue you a free
replacement with zero hassle.
Our way
✉
Email us
Replacement
You
We really don't want you to go through the hassle of re-packaging your item
and sending it back, because let's be honest...nobody has time for that.
✉:service@anmytek.com
GS005
Their way
Re-package item
Schedule pick up
Track package
Replacement
You
1/20
Verwandte Anleitungen für Anmytek GS005
Inhaltszusammenfassung für Anmytek GS005
- Seite 1 GS005 Let’s build the SKU No heartburn, when we handle the return Give us a call 1-909-455-7520 or shoot us a message at service@anmytek.com we will issue you a free replacement with zero hassle. Our way Their way ✉ Email us...
- Seite 2 ✉:service@anmytek.com IMPORTANT/ WICHTIG/ IMPORTANT/ 重要 IMPORTANTE/ IMPORTANTE/ SAFETY ADVICE/ SICHERHEITSHINWEISE/ CONSEILS DE SÉCURITÉ/ CONSEJO DESEGURIDAD/ CONSIGLIDI SICUREZZA/ 安全アドバイス EN - We recommend 1 or more people to install. DE - Wir empfehlen die Installation durch eine oder mehrere Personen. ES - Recomendamos que lo instalen 1 o más personas.
- Seite 3 ✉:service@anmytek.com CARE ADVICE / PFLEGEHINWEISE / CONSEILS D'ENTRETIEN / CONSEJOS DE CUIDADO / CONSIGLI PERLACURA / ケアアドバイス EN - Wipewithsoftdrycloth. DE - Mit einem weichen, trockenen Tuch abwischen. ES -Limpie con un paño suave y seco. FR - Essuyer avec un chiffon doux et sec.
- Seite 4 ✉:service@anmytek.com EN - ① During the process of assembly, do not fully tighten bolts or screws until all bolts orscrewsare lined up and inserted into holes; ② do not over-tighten the screws or bolts toavoid stripping; ③ It is not recommended to use power tools.
- Seite 5 ✉:service@anmytek.com Hardware List/ Hardwareliste/ Liste du matériel/ Lista de ハードウェア hardware/ Elenco dell'hardware/ 6×35mm 15×9mm 6×30mm Φ Φ Φ ×4 0 mm Φ A× 14 B× 14 C× 2 8 D× 6 4 ×1 4 mm 4 ×1 4 mm Φ...
- Seite 6 ✉:service@anmytek.com Product Diagram/ Produktdiagramm/ Diagramme duproduit/ Diagrama del producto/ Diagramma del prodotto/ 製品構成図 Whatsapp： EN - If there are any parts missing, damaged or defective, please feel free to contact us for support via the following email. DE–Sollten Teile fehlen, beschädigt oder defekt sein, können Sie sich gerne über die folgende E-Mail an uns wenden, um Unterstützung zu erhalten.
- Seite 7 ✉:service@anmytek.com × 12 × 2 7/20...
- Seite 8 ✉:service@anmytek.com ✉:service@anmytek.com × 2 × 2 × 2 × 2 × 2 8/20...
- Seite 9 ✉:service@anmytek.com ✉:service@anmytek.com × 5 × 10 9/20...
- Seite 10 ✉:service@anmytek.com × 5 × 10 × 4 × 4 10/20...
- Seite 11 ✉:service@anmytek.com × 4 × 20 × 4 ×8 ×8 11/20...
- Seite 12 ✉:service@anmytek.com ✉:service@anmytek.com × 8 × 4 12/20...
- Seite 13 ✉:service@anmytek.com TIPS TO ADJUST THE HINGES TO MAKE DOORS EVEN ： 1. Loosen Screw a-d, then lift or lower the hinge to adjust the height of the door. 2. Loosen Screw A, then push in or pull out the hinge to adjust the depth of the door.
- Seite 14 ✉:service@anmytek.com × 4 × 12 × 16 14/20...
- Seite 15 ✉:service@anmytek.com ✉:service@anmytek.com ×2 15/20 15/20...
- Seite 16 ✉:service@anmytek.com WALL FIXING GUIDE/ ANLEITUNG ZUR WANDBEFESTIGUNG/ GUIDE DE FIXATIONMURALE/ GUÍA DE FIJACIÓN EN PARED/ GUIDA AL FISSAGGIO A PARETE/ 壁固定ガイド EN - Supplied wall plugs are only suitable for use in masonry walls.When drilling into walls, always check for hidden wires or pipes, et DE –...
- Seite 17 ✉:service@anmytek.com EN - Hammer Fixing Wall Plug: For use with concrete block or brick walls, or walls stuck with plasterboard. The hammer fixing allows it to be fixed to the wall rather than the plasterboard. Always check the fixing is secure to the retaining wall.
- Seite 18 ✉:service@anmytek.com Tips 1: If the door is too low or too high, how to adjust it? Find the height screws shown as below. Loosen those screws, then lift up or lower the door to the suitable height, and tighten all screws finally.
- Seite 19 ✉:service@anmytek.com Suggerimenti 2: Se lo spazio tra due porte è troppo grande o troppo stretto, o addirittura la porta non riesce a chiudersi, come risolverlo? Trovare le viti mostrate di seguito. Se lo spazio è troppo grande, allentare la vite verso sinistra finché...
- Seite 20 ✉:service@anmytek.com If you are not entirely satisfied with your purchase,please feel free to contact us using the following steps: 1.Go to Your Orders. 2.Find your order in the list. 3.Select Problem with order. 4.Choose your topic from list displayed. 5.Select Contact seller.