INFINI LAVA 500 Kurzanleitung

infinite vision
MOUNTING YOUR LIGHT
1_lnstall the bracket onto your handlebar by fastening the
strap ring.
2.Slide the light into the bracket until it clicks into place.
Ø19 - Ø38mm
TO SWITCH MODES
Press the button on the top of the light.
l/
Constant
pressl .5
-264PD
seconds
to turn ON/OFF
*THERMOSTATIC:
Lumen output will automatically reduce if operating temperature becomes too high
BATTERY CAPACITY
TURN ON:
The indicator will show the remaining capacity by different color (fig. 1)
Green : 100% -
Orange : 49% - 25% (recommend
Red : - 0%
TURN OFF:
Double click to show the remaining capacity.
CHARGING
1.Please open the USB cover at the bottom of the light. (fig. 2)
2.Plug in provided Micro USB cable then plug into USB port. (fig.3)
3.1ndicator will show charging status by different color. (fig. 1)
Green : 100% - 50%
Orange : - 25%
Red : 24% -
Fully Charged: Light OFF
A NOT E
Please allow the unit to cool
safety, the charging function
discontinue if the internal temperature
slide in
Modememory funcion
Danish Standard)
Mode memory function
*Mode Memory Function: When you turn the light on, it lights
up in the last lighting mode you used
INDICATOR
to charge at this stage)
after each use. For
will automatically
is too high.
LIGHT REMOVAL
Press the release tab and slide the light away from the bracket.
Avoid touching this area when
you dismounting the light.
CliCk
hrs
Warning:
Press
360' ROTATABLE
3600
100 hrs
Micro
USB
LAVA 500
1-264P/PD
Slide away
BRACKET
(fig. 1)
open up
(fig.2)
(fig.3)