INFINI MINI LAVA I-261 W Kurzanleitung

infinite vision
1-26 IW/WD
MOUNTING YOUR LIGHT
Install the light on the handlebar by using strap or cable tie
When the light and bracket is in horizontal condition, install the light on the bracket and twist it in the position of 900 and fasten it
LIGHT REMOVAL
Twist the light in the direction of right and left into 900 and remove it from bracket.
1-261 R/RD
MOUNTING YOUR LIGHT
Install the light on the seat post, seat stay by using ring or strap.
Ø31.8mm Ø19-
When the light and bracket is in horizontal condition, install the light on the bracket and twist it in the position of 900 and fasten it.
LIGHT REMOVAL
Twist the light in the direction of right and left into 900 and remove it from bracket.
900
Tight up the cable
tie and cut the extra
part of it by using
scissors.
TO SWITCH MODES
Press the button on the top of the light.
-261W
F lashing
Hi-beam Low-beam
Pulsating
1.5 hrs 6 hrs 48 hrs
9 hrs
-261 WD (Meets Danish Standard)
Constant Flashing
Off
6.5 hrs 48 hrs
Tighten up the cable tie
and cut the extra part of
it by using scissors.
TO SWITCH MODES
Press the button on the front of the light.
Hi-beam Low-beam Flashing Pulsating
2 hrs 5 hrs 17 hrs 9 hrs
MINI LAVA
1-261 W/R/WD/RD
Optional : Helmet Bracket
o
Hook and loop fastener
to mount onto a helmet.
Tighten up the velcro strap
Clip the Igiht on the
helmet mount.
Press