Installation And Mounting - Code 3 Cd3802Awh Installations- Und Bedienungsanleitung

Installation and Mounting:

IMPORTANT! This unit is a safety device and it must be connected
to its own separate, fused power point to assure its continued
operation should any other electrical accessory fail.
Note: It is recommended to isolate wires/blunt wires that were cut or not used.
10in-lbs max. screw torque
CAUTION!
When drilling into any vehicle surface, make sure that the
area is free from any electrical wires, fuel lines, vehicle
upholstery, etc. that could be damaged.
Figure 1
Page 2 of 11