Control Elements; Care And Maintenance - Soba XH210 Gebrauchsanleitung

XH210 UPRIGHT FAN HEATER

CONTROL ELEMENTS

4-P ROTARY KNOB
1. Position
2. Position
3. Position
4. Position
TEMPERATURE ROTARY KNOB
1. From min to max on the scale: turn to required heating temperature.
2. From min clockwise to the end of the scale: turns off the heater.
ON/OFF SWING SWITCH
1. Turn the switch on when you want the heater to oscillate in order to enhance hot
air distribution; the fan heater will move back and forward at an angle of 90º.
2. When the switch is turned to ON, the light integrated in the switch will light up.
AUTOMATIC SAFETY MECHANISM
There is an automatic safety mechanism integrated in the base of the heater. If the
heater is knocked over or lifted up the unit will switch off automatically.

CARE AND MAINTENANCE

1. Always turn the 4-P Rotary Knob to "O" position and unplug the heater from the
socket when it is not in use and before cleaning.
2. Use a soft, dry cloth to wipe the exterior surfaces.
3. Never use detergents or solvents to clean the heater.
4. NEVER attempt to clean the interior of the heater.
5. NEVER ATTEMPT TO OPEN THE COVER OF THE HEATER!
6. Before storing the heater for the summer, wind up the cord and pack the heater
in the carton to prevent damage.
7. Always unwind the cord to its full length before use to prevent overheating.
SERVICE
Never attempt electrical or mechanical repairs yourself. Return the unit for repairs in
the original carton.
Subject to change without prior notice.
O The heater and fan are switched off.
Cooling air circulation without heating function.
Warm air circulation.
Hot air circulation.
5
INSTRUCTION MANUAL