HOMCOM 800-292V70 Bedienungsanleitung Seite 2

EN
Important Safety Instructions
Carefully read the instructions and warning in this manual and keep them for further
reference for the whole of the products life. They include important instructions
regarding operations and safety for installing, using and maintaining the product.
• After unpacking, make sure that the appliance is intact with no signs of damage
caused by transport. If in doubt, do not use the appliance and contact the supplier.
• If there is crack on the heating plate, immediately cut off the power supply and stop
usage.
• Before connecting the appliance, make sure that the power supply voltage
corresponds with that shown on the rating label.
• The appliance is not intended for use by children or infirm persons without
supervision.
• Children should be supervised to ensure that they do not play with the appliance.
• Supervision is necessary when the appliance is used near children.
• Do not immerse the product in liquid.
• The power plug must be removed from power socket before cleaning, maintenance
or moving the appliance.
• Improper installation may result in the risk of frle, electric shock and or injury to
persons.
• The appliance is without user-serviceable parts, do not attempt to repair,
disassemble or modify it.
• Do not the touch metal housing, grill plate, grease connector or heating plate when
the appliance is operating or cooling down as they are hot.
• Do not allow the cord to touch hotplate during operation or cooling down after use.
• Do not leave the appliance unattended when the appliance is operating.
• Do not leave the appliance without supervision when oil and fat are heated.
• The appliance must be cooled down completely after use before storing. Please
allow at least 30 minutes for the appliance to cool down.
• The appliance should be kept well clear of any inflammable materials such as
curtains and other flammable materials.
• The appliance should not be placed direct on a surface that could be damaged by
heat, a heat-insulating base may be needed.
• The power cord should not be allowed to hang over the edge of the work surface
during operation.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
1