Quax nv 55619-M2-WB Serie Anleitung Seite 25

55619-M2-WBxxx
Bad- en luiermeubel
Wickel- und Bademöbel
Step 3 : Use the parts of step 2, the bathtub L, the changing pad K, the bathtub plug O and the drainage tube M
Push the bathtub (L) on the wood structure. Insert the plug (O) in the opening on the inside of the bathtub. Re-
move it to drain the water afterwards. Push the tube (M) on the output on the outside of the bathtub and push its
end on the cap on top of the bathtub. Install the diaper pad (K) on top of the bathtub and push the ends of the
metal grips in the provided holes of the uprights of the frame. To move the pad, hold the pad fi rmly by the handle
and push it away from the bathtub. To put it back pull it upwards by the loop.
Baignoire et table à langer
Bath and diaper cabinet
info@quax.eu
25
By Quax nv