delight 55583 Bedienungsanleitung

delight al Digit safe with fingerprin
and keypad
DO NOT LEAVE THE KEYS OR THE EXTERNAL
Thank you for choosing our product, we hope you enjoy using it for a long time.
Store yourvaluables,jewelry,and passportin a large,durablesafe for maximumsecurity Thesafety Ofyour irreplaceable
items is ensuredby a fingerprintscannerand PINcode protection,capableof storingup to 100fingerprints,thus
preventingunauthorized access The securitycodecan be a uniquecombinationof 3-8 digits If the PIN
codeis forgotten, t he safecanonly beopenedwiththe masterkey.The"Dualmode"providesenhanced
protection,requiringbotha fingerprintand a PIN codeto open the safe
• Durable,robustdesign
Elegant a ppearance
• Buttonkeypad
• 3-8 digit PINcode
• 20-secondlockoutafter3 incorrectattempts
Digital ockingmechanism
Single-directionockingwith 19.5 mmsteel rods
900 dooropeningwithright-sidehinges
• Removable shelf Accessories:
• 2 includedkeys 4 x AA batteries
• Can be built in
1 removable
• Energy-efficient operateson 4 x AAbatteries
1 fabric insert
• External p owersupplyoption
4 screws andwall plugs
(in case of depletedinternalbatteries)
Extemalbatteryholder
ATTENTION! NEVER STORE THE PROVIDED
PRODUCT DESCRIPTION
a Yellow light indication:digital input / Red light indication:incorrect code
or fingerprintI Green light indication:unlocking
b There are four ways to open the door:
1. Usinga password
2. Usinga fingerprint
3 Combineduse of passwordand fingerprint
4. Usingthe overridekey,which bypasses both password
and fingerpnntfunctions
t reader
55583 EN
POWER SUPPLY INSIDE THE SAFE!
250 mm
Technical data:
Power Source: 4 x AA (included)
metal shelf External dimensions: 350 x 250 x 250 mm
Internal size: 346 x 220 x 246 mm
Thickness of steel wal . 2 mm
Door thickness: 43 mm, 2 mm steel cover
KEYS AND EXTERNAL POWER SUPPLY INSIDE
The factory-setdefault passwordis 1234
c
d No fingerprintsare set by default(if no fingerprint is set, any fingerprint
can open the safe)
The safe is equippedwith a memorydevice for storing passwordsand
e
fingerprints
Suggestion: Change the default password and update the fingerprint
duringfirst use
The safe can store up to 100fingerprints
g
h Upon activation,the safe will emit a beep,and all three lights will flash
simultaneously.
i To unlock the safe with a fingerprint or register a new one, place your
finger fully on the sensorfor propercontact
FIRST USE:
For your convenience,the safe includestwo override keys that bypass all
authentication(PIN,fingerprint).These keysallowyou to open thesafe even
if the batteries are dead or the passwordis forgotten
The keyholeis located betweenthe openingleverand thefingerprint reader,
beneaththe panel. Press the left side of the panelcover to remove it, insert
the key, turn it, and open the safe Insertthe batteries (4 x AA) into the
batterycompartmenton the innerside of the door.After this, you can change
the passwordto your preference(see the Changingthe Passwordsection)
UNDERVOLTAGE ALARM
If thevoltage drops below4.6 V (+1-0.2V), the light will flash five times
350 N n
after openingthe door,indicatingthe batteries are low For environmental
considerations,we recommendusingrechargeablebatteries.
OPEN THE DOOR
First Option:Enterthe 3—8-digit passwordand pressthe# button.After a
a
beep and green light, the electromagnetic ock will release within six
seconds
SecondOption: Placethe correctfingeron the fingerprintreader.After a
b
beep and green light, the Ockwill releasewithin six seconds.
Third Option: If the dual-mode feature is enabled, enter the correct
c
THE SAFE!
password, then place the correct finger on the fingerprint reader. The
safeWII beep and unlockwithin six seconds
d FourthOption: Pressthe left side of the key panel cover, insert the key
into the keyhole, andturn theopening lever.
If the key is locked inside, and no batteries or power are available, use
e
theexternal powersupply (batteryholderwith 4 x AA batteries).Connect
it to the slot at the bottom of the panel, then use methodsA, B, or C to
open the safe
PASSWORD CHANGE
Passwordmodificationis only possiblein Single Mode Ifthe safe is in Dual
Mode,switchto SingleModefirst
If no indicatorlights are on, press the securitybutton inside the door
briefly.The yelow LED and fingerprintreader lightwill tum on
Entera new 3—8-digit p assword,then pressthe # button
2
3 A green LED and two short beeps will confirmthe passwordchange
REGISTER NEW
SAFETY REASONS,
PRINT FOR 2-3 TIMES)
Usethe correct passwordor fingerprintto open the door.
2. If no indicatorlights are on, press the internalsecuritybutton
The fingerprintreader light willturn white
3. Placethe same fingeron the readerfour consecutivetimes.
On the fourth scan,the readerwill display a green light
4.
and emittwo beeps,confirmingthe fingerprintregistration
Note:
If registrationfails, the readerwill display a red light
Incorrect Code / Fingerprint
FUNCTION
f the passwordis entered incorrectlythreetimes or the fingerprintfails five
times, the safe will lock automatically,and a 20-second beep will sound.
After this, you can try again.
Factory Reset:
If no indicator lights are on, press and hold the internalsecurity buttonfor
3-4 seconds.A long beep will sound, the green LED will stay lit, and the
fingerprint reader will flash green. The system is now reset to factory
settings.
Switching Between
1: Activating Single Mode: If no indicator lights are on, press 1, then the
internalsecurity button.A longbeep and yellow LED indicateactivation.
2: Activating Dual Mode: If no indicator lights are on, press 2, then the
internalsecurity button.A longbeep and yellow LED indicateactivation.
Enabling Silent Mode:
If no indicatorlights are on, hold down the 3 button for three seconds until
the green LED flashestwice, indicating silent modeactivation
Disabling Silent Mode:
Hold downthe 3 button for three seconds.Two short beeps and two green
LEDflashes indicatethe system is back to sound mode
Note: After a power reset,the systemdefaultsto sound mode.
FINGERPRINT (SUGGESTION: FOR
PLEASE REGISTER ONE FINGER-
Alert:
Single and Dual Modes: