Packaging Contents - Oehlbach HDMI POWERLAN EXTENDER Bedienungsanleitung, Garantiehinweis

5. Connect the PowerLan transmitter to the power adaptor provided.
6. Connect the PowerLan receiver to the power adaptor provided.
7. The installation is now complete. If no image is displayed on the output device, first press the
Reset button on the receiver and then the reset button on the transmitter. The connection should
now be established, with an image displayed on the output device.

Packaging contents

•
OEHLBACH ProIn PowerLan HDMI Receiver (Rx)
®
•
OEHLBACH ProIn PowerLan HDMI Transmitter (Tx)
®
•
Power cords (2 pcs)
•
IR receiver
•
IR emitter
•
Instruction manual
Hinweise
Please observe the following instructions in order to prevent any risk of re, short-circuits or damage to
the product:
Do not expose the product to rain or moisture. Do not place any containers lled with water on the product.
Do not install the product in a bookcase, tted cupboard or similarly enclosed spaces. Please ensure that there
is suf cient ventilation for the product.
You should not cover the product or place items on the product in order to prevent short-circuits or re due to
overheating.
Do not place the product in proximity to sources of heat, e.g. heaters, stoves, etc.
Do not use the product in proximity to naked ames or candles.
Only use a dry cloth to clean the product.
Disconnect the power plug during a thunderstorm or if the device is not used for a longer period of time.
Protect the power cable against external forces such squeezing, crushing or impact.
Use the accessories provided only.
Please only use quali ed service personnel to carry out repairs or servicing work.