Troubleshooting; Safety Precautions; Simplified Eu Declaration Of Conformity - Inakustik Premium Bluetooth Audio Transmitter Bedienungsanleitung

TROUBLESHOOTING

If you are having problems with getting started or with the playback, please check the following items
• Make sure that the Bluetooth audio transmitter is switched on.
• Make sure that the audio cable on the Bluetooth audio transmitter is properly and firmly connected.
• Make sure that the audio source of the correct audio output is activated.
• Make sure that the audio output is set to a level that is audible.
• Make sure that the range has not been exceeded.
• In some cases, the device which is coupled first might not be activated. To rectify this, you need to switch
the first coupled device on and then off again and press the coupling button on the Bluetooth audio
transmitter for one second in order to restore the connection to the first coupled device.

SAFETY PRECAUTIONS

• Do not use the Bluetooth audio transmitter near any water (e.g. bath, sink, wash tub, damp basement,
swimming pool or similar places near water).
• Clean the device with a dry cloth.
• Disconnect the Bluetooth audio transmitter from the mains before cleaning.
• Do not place the Bluetooth audio transmitter near any sources of heat.
• Only use the accessories provided.
• Disconnect the Bluetooth audio transmitter from the mains if you will not be using it for a long time.
The copyrights for aptX® software are at CSR plc or one of its group companies. All rights reserved.
The aptX® brand and aptX logo are trademarks of CSR plc or one of its group companies and are registered
in one or more countries.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, in-akustik GmbH & Co. KG declares that the radio equipment 00415009 Premium Bluetooth Audio
Transmitter is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: www.in-akustik.de
12