Led Display - Inakustik Premium Bluetooth Audio Transmitter Bedienungsanleitung

CONNECTING THE FIRST HEADSET OR AV RECEIVER
1. Switch on the coupling mode of the Bluetooth headphone or the Bluetooth AV receiver. Refer to the ma-
nual of the device for more detailed information.
2. The Bluetooth audio transmitter combines the devices to be coupled automatically. Once the devices are
connected, the LED lights up continuously on the Bluetooth audio transmitter
CONNECTING TO THE SECOND HEADPHONE OR AV RECEIVER
1. Switch on the coupling mode of the Bluetooth headphone or the Bluetooth AV receiver. Refer to the ma-
nual of the device for more detailed information.
2. Press the coupling button on the Bluetooth audio transmitter for one second; the LED then flashes for a
few seconds while the Bluetooth audio transmitter searches for the second Bluetooth headphone or AV
receiver. At the same time the audio connection is disconnected to the first device that was connected.
3. The Bluetooth audio transmitter combines the devices to be coupled automatically. Once the devices are
connected, the LED lights up continuously on the Bluetooth audio transmitter.
Note: Bluetooth audio transmitter can connect two Bluetooth receivers at the same time. In some cases,
if you want to connect an additional device you may need to reset the Bluetooth audio transmitter for the
new connection.
4. In some cases, the device which is coupled first might not activate. To rectify this, you need to switch the
first coupled device on and then off again and press the coupling button on the Bluetooth audio transmit-
ter for one second in order to restore the connection to the first coupled device.
RESETTING
Hold down the coupling button on the Bluetooth audio transmitter for five seconds; the LED starts to flash
while it searches for Bluetooth receivers in coupling mode in the vicinity.
Note: The range of the Bluetooth audio transmitter is 10 m (line of sight). For optimum performance, we re-
commend placing the Bluetooth audio transmitter in the field of view. Do not obstruct the Bluetooth antenna;
otherwise the range will be less.

LED DISPLAY

DISPLAY
One flash per second for 5
seconds
Continuous light
OPER ATION MANUAL
MEANING
Switch on/couple
Connected
PREMIUM BLUE TOOTH AUDIO TR ANSMIT TER
DESCRIPTION
Searching for a device in
coupling mode
Device and transmitter are
connected
11