Coccolle First Way Handbuch Seite 8

EN
Assembly steps:
1. Handlebar and front fork
Place the washer and fork cap onto the front fork, then insert the fork into the
frame hole (Fig. 1). Place the fork cap, washer, and clamp on the upper part of
the fork in the correct order, then insert the handlebars into the hole in the frame
(Fig. 2). Adjust the handlebars to the desired height and securely tighten the
clamp.
2. Wheels
Insert the bearing into the wheel, then attach the spacer (Fig. 3) and place the
wheel with the bearing into the corresponding holes on the fork (Fig. 4). Secure
the wheel to the fork using screws and an allen key.
3. Saddle
Place the saddle clamp onto the balance bike frame, then insert the saddle into
the frame opening (Fig. 5). Adjust the saddle to the desired height and securely
fasten the saddle clamp.
Ensure that all fasteners are securely tightened before use.
Use instructions
When the balance bike is used, it is necessary to sit on the saddle, grab both
arms of the handlebar properly and then push alternately the feet on the ground.
When the child reaches speed on the bike, he must lift the feet to ride freely.
This way, the child can learn to keep the balance. To turn, the child must turn the
handlebar in the proper direction and keep his balance.
Product cleaning and maintenance
Wash the balance bike with a wet cloth, then wipe it dry. Do not use caustic or
abrasive cleaning agents.
This product is certified according to European laws and regulation,
tested by the following safety standards:
EN 71-1:2014+A1:2018/ EN 71-2:2020/ EN 71-3:2019+A1:2021
8