Modecom HUB IN DESK 60 Bedienungsanleitung Seite 3

INTRODUCTION:
Thank you for purchasing MODECOMproduct. Before use please read carefully manual. f you
haveany questions, please contact us.
INSTALLATION:
1. Insert the mounting ring into the desk.
2. Plugthe included power adapter into a wall outlet or surge suppressor.
3. Plugthe USBdevice cable into the USB port Ofyour computer .
4. After finish installation hub will be ready to use.
5. System will detect Hub and install the required driver.
6. Hub is ready to use.
PROBLEM SOLVING:
If the Hub has not been properly recognized by the computer:
• Ensurethat the USBcable is properly connected
• Checkthe computer's BIOSsettings
Ifthe device connected to the hub does not work you should:
• Checkthe cable from the device is properly plugged into the hub.
• Disconnect and re-plug the device cable to the hub.
MODECOM