Technical Data; Requirements For Installation - Royal Catering Rceg-80/700Cs Benutzerhandbuch

This User Manual has been translated using machine translation. We have made every effort to
ensure the translation is accurate, but please note that automated translations are not perfect
and are not meant to replace human translators. The official version of the User Manual is in
English. Any differences between the translated version and the original English are not legally
binding. If you have any questions about the accuracy of the translation, please refer to the English
version, which is the official reference. More language versions are available upon request via
info@expondo.com.

Technical data

Parameter description
Product name
Model
Voltage [V~/N] / Frequency [Hz]
Power [kW]
Dimensions (Width x Length x Height)
(mm)
Weight [kg]
Dust protection level
Purpose
The product is used to combine a versatile cooking appliance with convenient storage, offering a practical
solution for both home and commercial kitchens.
The user is liable for any damage resulting from unintended use of the device.

Requirements for Installation

• This product should be placed on a stable surface, with at least 10 cm of clearance on both sides from
non-combustible materials. The back of the unit should be at least 20 cm away from non-combustible
surfaces (e.g., brick walls).
• The voltage of the power supply must match the voltage specified on the product label.
• The customer must install a power switch, a circuit breaker, and a leakage protection device near the
equipment. Keep the area in front of the switch clear of obstructions for easy access.
• This equipment must be properly grounded before use.
• Before turning the machine on, check that all electrical connections are secure, and that the grounding
connection is reliable.
• If the power cable needs to be replaced, use a cable of the same model, and have the replacement
done by a qualified professional.
• Installation and maintenance of this product's electrical connections must be performed by a certified
electrician.
Operation
1. Ensure the power supply is installed correctly and meets the rated voltage required for operation.
2. Switch on the power. The green power indicator will light up, indicating that the device is receiving power.
Turn the thermostat clockwise to set the desired temperature. The yellow indicator will light up, and the
green indicator will turn off, signaling that the heating element has started, and the griddle is heating.
EN
Parameter value
Electric griddle with cabinet
RCEG-80/700CS RCEG-80/700CSG
400/3 / 50
800x740x930
102.5
RCEG-80/700CG
10.8
101 99
IPX4