ratiotec RT 500 Bedienungsanleitungen Seite 13

Time interval system
Open the door to activate the time interval. Subsequently, press the star (*) key and choose a
number between 0 and 9. Confirm this with the hash (#) key. The time interval can be graded
considering the following:
0
1
2
3
4
5
6
7
8
9
A signal tone arises to confirm the time interval.
Empty the Safe
To empty the safe please open it as indicated above. Afterwards the internal part can be removed
and opened at the backside.
Close the Safe
Close the door and rotate the handle anticlockwise.
Change of batteries
If the Safe does not want to open, the batteries could be dead. You will hear either a low signal or
no signal at all. The POS Safe requires eight 1,5 Volt batteries (LR6 type, 15 x 50 mm). In order to
open the battery compartment, remove both screws located in the control panel. Exchange the
batteries and make sure that no cable is loose or jammed. In case the Safe does not open
despite the exchange of batteries, please contact the Producer/Sales Representative.
Downloaded from www.Manualslib.com
no time interval
30 seconds
1 minute
1 minute, 30 seconds
2 minutes
2 minutes, 30 seconds
3 minutes
3 minutes, 30 seconds
4 minutes
4 minutes, 30 seconds
manuals search engine
12