FORMULER S TURBO Kurzanleitung

FORITULER
Installation / Kurzanleitung / Instalagäo
O
Satellite
O
O
4-
TV OUT
Troubleshooting
Problem
For Satellite
• Check the LNB ; Replace the LNB if necessary.
• Check
• Check the position of the dish; realign dish if necessary.
• If you are using a DiSEqC 1.Oswitch, check that you have
No or Bad Signal
connected and programmed the LNBs to the correct
connections
Common
Check the 'Signal Level' and the 'Signal Quality'
• See 'No Picture'
• Check the signal level, if this is low then tries adjusting the alignment of
Poor picture quality
your dish.
• See 'Does not display any message on the front panel' above.
• To match the STB system with your TV system (PAL/NTSC),
press V.Format button until a picture is displayed.
• Check the video output port is firmly connected to the TV or VCR.
No Picture
• Check that you have selected the Video Input on your TV.
• Check the brightness level of the TV.
• Check the resolution that your TV supports, and set the
proper resolution with the remote Resolution button to obtain a picture.
• Check the main power cable and check that it is plugged into
Does not display any message
on the front panel. a suitable power outlet
• See 'No Picture'
No Sound
• Check
• Check
• Point remote control directly towards the STB.
Remote Control does not operate
• Check that the STB button lights up when you press any button.
• Check and replace batteries.
Included Accessories
Remote control Batteries
Remote control extender TV mount bracket
STURBO
Quick Installation
English
Solution
tuner module
the cable from the LNB.
on the switch.
features for all types of DVB receivers
above.
above
the volume level of the TV and STB.
the Mute status of the TV and STB.
Power adapter TV OUT Cable Quick guide
Optional
Wi-Fi Adapter Joystick USB DVB-T Tuner
Optional