How To Assemble - actiforce Duorest Alpha 30H Handbuch

•„‰"˘fi-ˆ ` 2012.3.21 5:1 PM ˘

How to assemble

MODEL : α 30H
①
②
<Picture1>
① Make sure that headrest should be inserted
until it sounds clattering.
② Make sure that hand bolt for backrest frame is
firmly tightened before using the chair.
③ Be careful not to get your fingers jammed
while armrest rotating as shown in Picture 1.
Size & Color
(W:seat width / D:seat depth / H:height from the floor to seat)
Model No. Size(in mm) Color
α 30H
W510×D500×H450/580 Mesh Black
` 27 NO.3 EAGLERIP/D-POST-2400-175-C
❶ Gather all of isolated items as shown in
the left picture
❷ Insert casters into base.
❸ Leave base with casters on the floor.
❹ Insert gas cylinder into base.
❺ Insert seat plate into gas cylinder.
❻ Insert backrest frame ( "J"bar) into seat
plate (a) and fix it with hand bolt (b)
■ How to insert "J" bar into seat plate
▶
(a) (b)
❼ Insert headrest support into upside of
backrest frame as shown in the left
picture.
❽ Check the chair working properly.
③
Material
Structure : steel, aluminum, plastic and etc
Cushion : Polyurethane foam
How to assemble
23
MODEL : α 30N
②
<Picture1>
Size & Color
Model No. Size(in mm)
α 30N
W510×D500×H450/580
❶ Gather all of isolated items as shown in
the left picture
❷ Insert casters into base.
❸ Leave base with casters on the floor.
❹ Insert gas cylinder into base.
❺ Insert seat plate into gas cylinder.
❻ Insert backrest frame ( "J"bar) into seat
plate (a) and fix it with hand bolt (b)
■ How to insert "J" bar into seat plate
①
▶
(a)
❼ Insert headrest support into upside of
backrest frame as shown in the left
picture.
❽ Check the chair working properly.
① Make sure that hand bolt for backrest frame is
firmly tightened before using the chair.
② Be careful not to get your fingers jammed
while armrest rotating as shown in Picture 1.
(W:seat width / D:seat depth / H:height from the floor to seat)
Color Material
Structure : steel, aluminum, plastic and etc
Mesh Black
Cushion : Polyurethane foam
24
(b)