•„‰"˘fi-ˆ `
2012.3.21 5:1 PM
˘
Parts Description
<Model : α 30N>
①
Headrest
②
Backrest
③
Hand bolt for backrest width adjustment
④
Hand bolt for backrest height adjustment
⑤
Armrest
⑥
Button for the height adjustment of armrest
⑦
Lever for the seat height adjustment
⑧
Knob for the tilt tension adjustment
⑨
Lever for the tilt angle adjustment
⑩
Lever for the sliding seat depth adjustment
⑪
Hand bolt for backrest frame
⑫
Gas cylinder
⑬
Star Base
⑭
Caster
` 23
NO.3 EAGLERIP/D-POST-2400-175-C
19
<Model : α 30H>
Basic Operation
■ Seat Height
Rear lever on right side of chair
To raise : While removing your weight
from chair, lift lever up.
To lower : While seated, lift lever up
(adjustable range: 95mm)
■ Tilt Lock
Lever on left side of chair
To lock : Press lever down and recline as far
as you like. Move lever up to define such mode.
To unlock : Press lever down and lean
backward (adjustable range : total 21 °with
3 positions)
20
■ Tilt Tension
Front stem with knob on right side
(can be pulled out or put in for use)
To increase tension : Turn knob forward
(clockwise, toward "+"sign).
To decrease tension : Turn knob backward
(counterclockwise, toward "-"sign).
■ Seat Depth Adjustment
Lever under front end of seat
To adjust depth : Lift lever up and move
seat forward or backward to desired
position. (adjustable range : 50mm)