Password - Quick Tools Qu3000 Benutzerhandbuch

8.
Caution:
 The initial password is 000.
 After set a new password, the parameters setting are locked and cannot
do channel selecting. It only can select technic-segment (1~6).
1. Enter the password inputting window. Turn off the unit. Press and hold the
"▲" & "▼" buttons not loose, and then turn on the unit until the window
displays "C" and "set". Press "*" button to enter into the password inputting
window and the 100's digit will flicker.
2. Press the "▲" or "▼" button to change the number , and press "" button to
move the cursor to next digit.
3. If the inputting password is right, it comes into the password change
interface and the window displays
wrong, it will jump into the work interface.
4. After into the password change interface, press "*" button before setting new
password. There are two times to input the password.
If the inputting passwords of two times are not same each other, the

password setting is not successful. And it will jump into the work state
and the parameters setting are locked.
If the inputting passwords of two times are identical, the password

setting is successful. The new password will flicker three times and the
system will sound "di-di-di" and then jump into the work state.

Password

11
USER MANUAL
. If the inputting password is